|
Shampoo
Brushes
-
Flow-thru brush design, cleans
carpets without soaking.
Gentle on carpet fibers.
Not for support for pads.
|
|
|
Scrubbing
Brushes
-
Flow-thru brush design,
thoroughly cleans most types of floors.
DO NOT
USE
ON
CARPETS
Not recommended for wood floors.
Works as support for pads.
|
|
|
Polishing
Brushes
Not for support for pads.
|
|
|
Green
Scrubbing pads
Attach to scrubbing brushes,
not
shampoo or polishing brushes. |
|
|
Tan Cleaning Pads
Attach to scrubbing brushes,
not
shampoo brushes or polishing brushes. |
|
|
Lambswool
Buffing Pads
Attach to scrubbing brushes,
not
shampoo brushes or polishing brushes.
|
|
|
*Both the
lambswool and felt pads are designed to achieve a high gloss finish on a
floor that has been cleaned or for touch ups between deep cleaning. The
results depend on the floor’s general condition. You may try buffing
with each type on different surfaces and then decide which better fits your
floor’s specific needs. |
|
|
Felt
Buffing Pads
Mount directly on scrubbing brushes.
|
|
|
 FYI:
plastic retainers, to hold pads onto scrubbing brushes
(comes with pads).
The older machines had snaps to connect the
brushes and pads, if you have the old brushes with the snap, you would
need to update to the new scrubbing brushes for these pads to connect to
your machine. |
|
|
Email us with any
questions. |
|
|
* Prices include shipping charges -
for US shipping addresses only.
e-mail us for other countries.
Walk in sales are priced lower.
|
|
|
Always trying to help you, our customers, here is
some information we found from the people that manufacture the above
products. Hope it gives you the extra information you may have been
looking for.
Also, we have scanned a copy of the
instructions that may be of assistance to you.
click
here for instruction manual
Jerry and Marilyn
4 EASY STEPS TO TOTAL FLOOR CARE
KIND OF FLOOR
WOOD, MARBLE, LINOLEUM
Step 1 CLEAN Neutral Cleaner
-Dilute the Neutral Cleaner in the tank following the instructions on the
bottle.
-Use the Cleaning Machine with tan cleaning pads.
-If the floor is very dirty use the green scrubbing pads.
-Mop and let dry.
-Follow with step 2.
Step 2 Polish
-Use the Cleaning Machine with dry tan pads on dry scrubbing brushes.
-Continue with step 3.
Step 3 Buff
-Apply two coats of the High Gloss Protective Floor Finish.
-Between waxings use the Cleaning Machine with lambswool pads to maintain a
high gloss finish.
Step 4 TOUCH UPS Touch ups
-To remove scuff marks from the floor's finish use the Cleaning Machine with
dry tan pads.
-If the floor is very dirty, use the Cleaning Machine as described in step
1.
KIND OF FLOOR CARPETING & RUGS
Step 1 CLEAN Shampoo
-Dilute Dry Foam Shampoo in the machine tank following the instructions on
the bottle.
-Use the Cleaning Machine with soft white bristle carpet brushes.
-Use the trigger mechanism to dispense the right amount of shampoo sparingly
until you see a white foam on the carpet.
-Guide the Cleaning Machine with forward and backward movements.
Step 2 Let Dry
-After shampooing let dry, 3-4 hours, preferably over night.
Step 3 Vacuum
-Vacuum crystalized dirt debris.
Step 4 TOUCH UPS Touch ups
-Use the Cleaning Machine with the Dry Foam Rug Shampoo to remove spots and
maintain high traffic areas without the need to shampoo the entire carpet.
-To remove difficult stains use the Koblenz Carpet Spotter before shampooing.
If you have heavy grease based stains use the Cleaning Machine with the Heavy
Duty Cleaner. Follow with the Dry Foam Rug Shampoo.
KIND OF FLOOR
CERAMIC TILE, GROUT, VINYL & CONCRETE
Step 1 CLEAN Heavy Duty Cleaner*
-Dilute the Heavy Duty Cleaner in the tank of the Cleaning Machine following
the instructions on the bottle.
-Use the Cleaning Machine with the natural bristle brushes or green scrubbing
pads.
-Mop and let dry.
-Continue with step 2.
Step 2 Polish
-Use the Cleaning Machine with dry tan pads to obtain a high gloss shine
follow with step 3.
Step 3 Buff
-Apply two coats of High Gloss Protective Floor Finish with a sponge. Buff
with felt pads.
-Between waxings use the Cleaning Machine with felt buffing pads to renew the
shine.
Step 4 TOUCH UPS Touch ups
-To remove scuff marks, use the Cleaning Machine with dry tan pads, these
will remove marks without dulling the finish.
-If the floor is very dirty, use the Cleaning Machine as described in step
1.
*NOTE: Scrubbing brushes are recommended for textured surfaces and grout,
green pads are recommended for smooth surfaces.
|
|
|
